DTC P2096: Post Catalyst Fuel Trim System Too Lean Bank 1
P2096 - POST CATALYST FUEL TRIM SYSTEM TOO LEAN BANK 1
| Description: The PCM monitors the correction value from downstream heated oxygen sensor (HO2S) as part of the fore-aft oxygen sensor control routine. This DTC sets when the correction value is greater than a calibrated limit. | |||
Possible Causes:
|
|||
| Diagnostic Aids: Inspect the connectors for signs of damage, water ingress, or corrosion. | |||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to PINPOINT TEST DZ . | ||