DTC P115E: Throttle Actuator Control (TAC) Throttle Body Air Flow Trim At Max Limit
P115E - THROTTLE ACTUATOR CONTROL (TAC) THROTTLE BODY AIR FLOW TRIM AT MAX LIMIT
| Description: During idle, the PCM monitors the throttle angle and airflow. If the airflow is determined to be less than expected, the PCM adjusts the throttle angle to compensate. The airflow reduction is typically the result of engine deposit buildup around the throttle plate. This DTC sets when the PCM has reached the maximum allowed compensation and is no longer able to compensate for the buildup. | |||
Possible Causes:
|
|||
| Diagnostic Aids: Install a new throttle body. Refer to the appropriate Fuel Charging and Controls article. | |||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | Refer to the Description, Possible Causes and Diagnostic Aids for the DTC. | ||