DTC P0341: Camshaft Position Sensor A Circuit Range/Performance (Bank 1 Or Single Sensor)
P0341 - CAMSHAFT POSITION SENSOR A CIRCUIT RANGE/PERFORMANCE (BANK 1 OR SINGLE SENSOR)
| Description: The PCM monitors the CMP circuit for a noisy signal from the camshaft position (CMP) sensor on bank 1 (vehicles with a single CMP sensor per bank) or bank 1 sensor 1 (vehicles with dual CMP sensors per bank). For additional CMP sensor location information, refer to ENGINE CONTROL COMPONENTS . | |||
Possible Causes:
|
|||
| Diagnostic Aids: Harness routing, harness alterations, incorrect shielding, or electrical interference from other systems may have an intermittent impact on the CMP signal. | |||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to PINPOINT TEST DR . | ||