DTC P0325: Knock Sensor 1 Circuit (Bank 1)
P0325 - KNOCK SENSOR 1 CIRCUIT (BANK 1)
| Description: The knock sensor (KS) detects vibrations upon increase and decrease in engine RPM. The KS generates a voltage based on this vibration. This DTC sets if the voltage goes outside a calibrated level. | |||
Possible Causes:
|
|||
| Diagnostic Aids:
A knock sensor voltage greater than 0.5 volt with the ignition ON engine OFF indicates a concern is present. The vehicle may need to be driven for several minutes to set this DTC. |
|||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to PINPOINT TEST DG . | ||