DTC P0106: Manifold Absolute Pressure (Map/BARO) Sensor Range/Performance

P0106 - MANIFOLD ABSOLUTE PRESSURE (MAP/BARO) SENSOR RANGE/PERFORMANCE

For Vehicles With 3.5L GTDI Engine
Description: This DTC sets when the manifold absolute pressure (MAP) PID does not correlate with the barometric pressure (BARO) and the throttle intake pressure (TIP_PRS_BOOST) PIDs at ignition ON. It will also set if the MAP and TIP_PRS_BOOST PIDs fail to correlate when running, but the TIP_PRS_BOOST PID does correlate with the BARO PID at idle.
Possible Causes: Slow responding manifold absolute pressure (MAP)/intake air temperature 2 (IAT2) sensor Damaged MAP/IAT2 sensor
Diagnostic Aids:
For All Others
Description: This DTC sets when the MAP sensor input is not within the calibrated value.
Possible Causes: Slow responding MAP sensor Damaged MAP sensor
Diagnostic Aids:
Application	Key On Engine Off	Key On Engine Running	Continuous Memory
F-150 3.5L, Flex 3.5L GTDI, MKS 3.5L, MKT 3.5L, Taurus 3.5L GTDI	GO to PINPOINT TEST EA .
All others	GO to PINPOINT TEST DM .