LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Explorer Base, 3.5 8, AWD, 6F50 >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine System - General Information >> Component Test(S) >> Cylinder Bore Out-of-Round >> General Procedure

General Procedure

NOTE: For specifications refer to the appropriate engine mechanical article. For 2.0L GTDI, refer to the GENERAL SPECIFICATIONS , or for 3.5L Ti-VCT, refer to the GENERAL SPECIFICATIONS tables.
  1. Measure the cylinder bore in 2 directions. The difference is the out-of-round.
    Fig 1: Identifying Directions For Measuring Cylinder Bore
    G06289009Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals