LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Explorer Base, 3.5 8, AWD, 6F50 >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine System - General Information >> Component Test(S) >> Camshaft Surface Inspection >> General Procedure

General Procedure

  1. Inspect camshaft lobes for pitting or damage in the contact area. Minor pitting is acceptable outside the contact area.
    Fig 1: Locating Camshaft Lobes Inspection Areas
    G06064055Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals