LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Explorer Base, 3.5 8, AWD, 6F50 >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine Mechanical - 3.5L-Ti-VCT >> Removal And Installation >> Engine Oil Pressure (EOP) Switch >> Removal

Engine Oil Pressure (EOP) Switch: Removal

  1. If equipped, remove the engine oil cooler. REFER to Oil Cooler .
  2. Disconnect the EOP switch electrical connector.
    Fig 1: Locating EOP Switch Electrical Connector
    G08029512Courtesy of FORD MOTOR CO.
  3. Remove the EOP switch.
    Fig 2: Identifying EOP Switch
    G08029513Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals