Engine Mount: Removal

With the vehicle in NEUTRAL, position it on a hoist. REFER to JACKING AND LIFTING for lifting points.
Remove degas bottle. REFER to DEGAS BOTTLE .
Remove the 3 twist-type retainers and remove the air duct from the subframe.

Fig 1: Locating Underbody Air Duct And Twist Lock Retainers
Courtesy of FORD MOTOR CO.
NOTE: Failure to position the wood block and floor jack as illustrated can result in damage to the oil pan

Position a floor jack with a block of wood under the front of the oil pan to support the engine.

Fig 2: Positioning Floor Jack With Wood Block Under Front Oil Pan To Support Engine
Courtesy of FORD MOTOR CO.
Remove the 4 engine mount nuts, the 3 engine mount bolts and the engine mount.

Fig 3: Locating Engine Mounting Nuts And Bolts
Courtesy of FORD MOTOR CO.