Disassembly And Assembly: Engine: Assembly: Notes
NOTE:
During engine repair procedures, cleanliness is extremely important. Any foreign material, including any material created while cleaning gasket surfaces that enters the oil passages, coolant passages or the oil pan, may cause engine failure.
NOTE:
Assembly of the engine requires various inspections/measurements of the engine components (engine block, crankshaft, connecting rods, pistons and piston rings). These inspections/measurements will aid in determining if the engine components will require replacement. REFER to
ENGINE SYSTEM - GENERAL INFORMATION
.
NOTE:
The Wheel Hub Bearing Cup Installer is used to install the VCT solenoid seals.
NOTE:
Refer to exploded view(s) and any Warnings, Notices, Notes, Materials, Specifications, and Special Tools. Items in the exploded views may not be listed in order of removal.