LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Explorer Base, 3.5 8, AWD, 6F50 >> Repair and Diagnosis >> Electrical >> Gauges >> Information Center - Instrumentation, Message Center, And Warning Chimes >> Diagnostic Routine(S) >> Diagnostic Routine AG >> Pinpoint Test

Pinpoint Test

  1. RETRIEVE THE RECORDED DTCs  FROM THE IPC SELF-TEST
    1. Using a scan tool, perform the IPC self-test.

    Are any DTCs recorded? 

    1. Yes: For DTC U0140:00, REFER to Diagnostic Routine AV: U0140:00 .

      For DTC U0424:82, REFER to Diagnostic Routine BC: U0424:82 .

      For all other DTCs  , REFER to DTC Chart: Instrument Panel Cluster (IPC) .

    2. No: GO to .
  2. RETRIEVE THE RECORDED DTCs  FROM THE HVAC MODULE SELF-TEST
    1. Using a scan tool, perform the HVAC module self-test.

    Are any DTCs recorded? 

    1. Yes: For EMTC, DTC CHART: HEATING VENTILATION AIR CONDITIONING (HVAC) MODULE - ELECTRONIC MANUAL TEMPERATURE CONTROL (EMTC) ,

      For DATC, REFER to DTC CHART: HEATING, VENTILATION, AND AIR CONDITIONING (HVAC) MODULE - DATC .

    2. No: GO to .
  3. RETRIEVE THE RECORDED DTCs  FROM THE PCM KOEO SELF-TEST
    1. Using a scan tool, perform the PCM KOEO self-test.

    Are any ambient temperature sensor DTCs recorded? 

    1. Yes: REFER to SECTION 3: SYMPTOM CHARTS .
    2. No: The system is operating correctly at this time. The condition may have been caused by a heat soak concern.