LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Explorer Base, 3.5 8, AWD, 6F50 >> Repair and Diagnosis >> Drivelines & Axles >> Differentials & Drive Axles >> Rear Drive Axle/Differential >> Removal And Installation >> Axle Assembly >> Removal

Axle Assembly: Removal

  1. Remove the driveshaft assembly. REFER to DRIVESHAFT .
  2. Remove the rear halfshafts. REFER to HALFSHAFT .
  3. Remove the stabilizer bar. REFER to STABILIZER BAR .
  4. Position a suitable transmission hydraulic jack to the axle housing.
    • Securely strap the jack to the housing.
  5. Remove the 4 differential housing-to-front insulator bracket bolts.
  6. Remove the 6 side insulator bracket-to-rear axle differential bolts.
  7. Lower the axle to gain clearance to the ATC electrical connector and disconnect the connector.
  8. Remove the axle assembly.
scientia non olet · About LEMON Manuals