LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Explorer Base, 3.5 8, AWD, 6F50 >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Rear Disc Brake System >> Removal And Installation >> Rear Brake Flexible Hose >> Installation

Rear Brake Flexible Hose: Installation

  1. Connect the brake flexible hose to the brake caliper.
    • Tighten to 25 Nm (18 lb-ft).
  2. Install the retaining clip for the brake flexible hose.
  3. Connect the brake tube fitting to the brake flexible hose.
    • Tighten to 17 Nm (150 lb-in).
  4. Bleed the brake caliper. REFER to COMPONENT BLEEDING .
scientia non olet · About LEMON Manuals