LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Explorer Base, 3.5 8, AWD, 6F50 >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Power Brake Actuation - Brake Booster >> Removal And Installation >> Brake Vacuum Pump >> Removal

Brake Vacuum Pump: Removal

NOTE: Removal steps in this procedure may contain installation details.
  1. Remove the air cleaner outlet pipe. REFER to INTAKE AIR SYSTEM COMPONENTS - EXPLODED VIEW .
  2. Fig 1: Removing Air Cleaner Outlet Pipe
    G08028122Courtesy of FORD MOTOR CO.
    • 10 Nm (89 lb-in)
    Fig 2: Locating Brake Vacuum Pump Mounting Bolts
    G08028123Courtesy of FORD MOTOR CO.
  4. Visual check.
    Fig 3: Inspecting Brake Vacuum Pump
    G08028124Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals