LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Explorer Base, 3.5 8, AWD, 6F50 >> Repair and Diagnosis >> Body & Frame >> Seats >> Seat System - Seats-Seating - 3RD Row >> Removal And Installation >> Seat Backrest Cover - Manual >> Installation

Seat Backrest Cover - Manual: Installation

  1. Install the backrest trim cover.
    • Route the strap through the trim cover.
  2. Install 3 rows of 3 hog rings.
  3. Install the pivot bolt.
    • Tighten to 54 Nm (40 lb-ft).
  4. Secure the backrest cover inner J-clips, close the trim cover and secure the lower J-strip.
  5. Secure the backrest cover upper J-clip under the head restraint.
  6. If removed install the RH seat outboard pivot cover.
  7. Install the LH seat outboard pivot cover.
scientia non olet · About LEMON Manuals