LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Explorer Base, 3.5 8, AWD, 6F50 >> Repair and Diagnosis >> Body & Frame >> Seats >> Seat System - Seats-Seating - 3RD Row >> Removal And Installation >> Power-Fold Seat Module (PFSM) >> Installation

Power-Fold Seat Module (PFSM): Installation

  1. Carefully lift the LH load floor flapper panel, install the PFSM, connect the electrical connectors and attach the retainers.
  2. Slightly raise the LH load floor flapper panel, attach the wire harness retainer to the load floor support studs.
  3. Attach the LH load floor support to the load floor panel.
scientia non olet · About LEMON Manuals