LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Explorer Base, 3.5 8, AWD, 6F50 >> Repair and Diagnosis >> Body & Frame >> Seats >> Seat System - Seats-Seating - 1ST Row >> Diagnostic Routine(S) >> Diagnostic Routine AI >> Diagnostic Overview >> Normal Operation and Fault Conditions

Normal Operation and Fault Conditions

DTC FAULT TRIGGER CONDITIONS

DTC Description Fault Trigger Conditions
B272F Passenger Ignition Run/Blower Circuit Short to Ground If either the blower voltage supply or the shared return circuits are open (to both cushion and backrest blowers) or shorted to voltage, the DTC is set and after 4-6 seconds the DCSM disables outputs to the passenger seat. The DTC also sets if the blower voltage supply or return circuit is open to only one blower when DCSM supply voltage is less than 12 volts.