Easy Entry, Easy Exit

The easy entry/exit feature is a function of the DSM that moves the driver seat back approximately 50.8 mm (2 in) (unless seat is already positioned at or near the end of travel) when the ignition key is removed from the ignition switch. The DSM receives a key-in-ignition status over the MS-CAN  and operates the driver seat rearward. The DSM cancels this operation if a valid input command is received from the driver seat control switch, memory set switch, exterior mirror control switch or if the function has been disabled.

The DSM records the current seat positions before operating the seat for an easy exit operation. This recorded position returns the seat to this position on the easy entry operation. During easy entry operation, the seat is returned to the position previous to the easy exit operation. Easy entry operation is cancelled if a valid input command is received by the DSM.

The easy entry/exit feature can be enabled/disabled on the message center. For information on the message center, refer to the Owner's Literature.