Pinpoint Test

CHECK FOR AN ENERGIZED KEY REMOVAL INHIBIT SOLENOID
1. Remove the BCM fuse 28 (15A).
2. Attempt to turn the ignition key to the ON position and then back to the lock position and remove the key.
Does the ignition lock cylinder turn to the lock position and can the key be removed?
- Yes: REFER to DIAGNOSTIC ROUTINE G : The Ignition Key Cannot Be Returned to the OFF Position.
- No: GO to 2 .
CHECK THE IGNITION LOCK CYLINDER FOR BINDING
1. Remove the ignition lock cylinder. REFER to Ignition Lock Cylinder .
2. Rotate the ignition lock cylinder through all positions using the key.
Does the ignition lock cylinder freely rotate through all positions and can the key be removed from the lock cylinder?
- Yes: INSTALL a new ignition lock cylinder housing. REFER to Ignition Lock Cylinder Housing .
- No: INSTALL a new ignition lock cylinder. REFER to Ignition Lock Cylinder .