LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Explorer Base, 3.5 8, AWD, 6F50 >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Anti-Theft System - Passive Anti-Theft System - Without Intelligent Access >> General Procedures >> Passive Anti-Theft System (PATS) Parameter Reset >> General Procedure

General Procedure

  1. Turn the key from the OFF position to the RUN position.
  2. From the scan tool, enter TOOLBOX. Select Body>Security>PATS Functions and follow the IDS on-screen instructions to enter PATS security access.
  3. NOTE: If the BCM was replaced at least 2 keys must be programmed to the BCM. After completing step 3, leave the scan tool connected and REFER to Erase All Keys and Program Two Keys .

    From the scan tool, select "Parameter Reset" and follow the IDS on-screen instructions.

scientia non olet · About LEMON Manuals