LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Explorer Base, 3.5 8, AWD, 6F50 >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Anti-Theft System - Passive Anti-Theft System - With Intelligent Access >> General Procedures >> Erase All Keys and Program Two Keys >> General Procedure

General Procedure

NOTE: Program a minimum of 2 keys into the vehicle.
NOTE: To enter PATS security access if no programmed IA keys are available, start a vehicle session using a tear tag or PCM part number. PATS security access can still be granted even with the ignition off.
  1. From the scan tool, enter TOOLBOX. Select Body>Security>PATS Functions and follow the IDS on-screen instructions to enter PATS security access.
  2. From the scan tool menu select "Ignition Key Code Erase" and follow the IDS on-screen instructions until the key erase procedure completes.
  3. All keys are now erased. Leave the scan tool connected and REFER to Key Programming Using Diagnostic Equipment  procedure to program 2 keys.
scientia non olet · About LEMON Manuals