LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Explorer Base, 3.5 8, AWD, 6F50 >> Repair and Diagnosis >> Accessories & Equipment >> Wiper/Washer Systems >> Wiper System & Washer System >> General Procedures >> Wiper Blade and Pivot Arm Adjustment - Windshield >> General Procedure

General Procedure

  1. Cycle and park the windshield wipers.
  2. Verify the RH and LH windshield wiper blades are located at the alignment marks on the windshield glass.
    Fig 1: Locating RH And LH Wiper Blades At Alignment Marks On Glass
    G06271581Courtesy of FORD MOTOR CO.
  3. NOTE: Make sure that there is no mechanical binding in the linkage preventing the wiper arms from returning to the fully parked position.

    If necessary, remove the windshield wiper pivot arms and reposition them to the alignment marks on the windshield glass. REFER to Wiper Pivot Arm - Front .