LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Explorer Base, 3.5 8, AWD, 6F50 >> Repair and Diagnosis >> Accessories & Equipment >> Steering Column Switches >> Removal And Installation >> Steering Wheel Switch >> Installation

Steering Wheel Switch: Installation

  1. Install steering wheel switch making sure all 3 tabs are seated in the retainers.
  2. Connect the electrical connector.
  3. Position the steering wheel trim cover and install the 3 screws.
    Fig 1: Locating Steering Wheel Trim Cover Screws
    G07402174Courtesy of FORD MOTOR CO.
  4. Install the steering wheel. REFER to STEERING WHEEL .
scientia non olet · About LEMON Manuals