LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Explorer Base, 3.5 8, AWD, 6F50 >> Repair and Diagnosis >> Accessories & Equipment >> Steering Column Switches >> Removal And Installation >> Steering Column Multifunction Switch >> Installation

Steering Column Multifunction Switch: Installation

  1. Position the multifunction switch and install the screw(s).
    • Tighten to 1 Nm (9 lb-in).
  2. If equipped, install the brake pedal adjust switch. REFER to PEDAL ADJUST SWITCH .

    Install the steering column shrouds. REFER to STEERING COLUMN SHROUD .

scientia non olet · About LEMON Manuals