Start-Stop Switch: Removal

Using an appropriate trim tool, separate the start/stop switch bezel from the instrument panel.

Fig 1: Locating Start/Stop Switch Bezel
Courtesy of FORD MOTOR CO.
Disconnect the electrical connector and remove the start/stop switch and bezel.

Fig 2: Locating Start/Stop Switch And Bezel Electrical Connector
Courtesy of FORD MOTOR CO.
Using a pocket screwdriver (or similar tool), disengage the 4 retainer tabs and separate the start/stop switch from the bezel.

Fig 3: Locating Start/Stop Switch Retainer Tabs
Courtesy of FORD MOTOR CO.