Symptom Chart: Reversing Lamps

Diagnostics in this service information assume a certain skill level and knowledge of Ford-specific diagnostic practices. Refer to DIAGNOSTIC METHODS for information regarding Ford-specific diagnostic practices.

SYMPTOM CHART

Condition	Possible Sources	Actions
A module does not respond to the scan tool	Fuse Wiring, terminals or connectors Module	REFER to SYMPTOM CHART: COMMUNICATION NETWORK .
All the reversing lamps are inoperative	Wiring, terminals or connectors Transmission range concern BCM	VERIFY the bulbs are OK. If OK, REFER to Diagnostic Routine AB: All the Reversing Lamps Are Inoperative .
An individual reversing lamp is inoperative	Wiring, terminals or connectors Bulb	VERIFY the bulb is OK. If OK, REFER to Diagnostic Routine AC: An Individual Reversing Lamp Is Inoperative .
The reversing lamps are on continuously	Wiring, terminals or connectors Transmission range concern Auto-dimming interior rear view mirror BCM	REFER to Diagnostic Routine AD: The Reversing Lamps Are On Continuously .