Symptom Chart: Collision Avoidance
Diagnostics in this service information assume a certain skill level and knowledge of Ford-specific diagnostic practices. Refer to
DIAGNOSTIC METHODS
for information regarding Ford-specific diagnostic practices.
SYMPTOM CHART
| Condition |
Possible Sources |
Actions |
- A module does not communicate with the scan tool
|
- Fuse
- Wiring, terminals or connectors
- HUD module
|
|
- The forward collision warning system is inoperative
|
- Wiring, terminals or connectors
- C-CM
- HUD module
- IPC
|
|
- The HUD module is inoperative
|
|
|
- "COLLISION WARN NOT AVAILABLE SENSOR BLOCKED" message in the IPC message center
|
|
|
- The forward collision warning system cannot be deactivated
|
- A MyKey® restricted key is used
|
- VERIFY if a MyKey® restricted key is in the ignition. REFER to the Owner's Literature.
|