Symptom Chart: Parking Aid - Video

Diagnostics in this information assume a certain skill level and knowledge of Ford-specific diagnostic practices. REFER to ENGINE CONTROLS - DIAGNOSTIC METHODS (EXCEPT DIESEL & HYBRID) for information regarding Ford-specific diagnostic practices.

SYMPTOM CHART

Condition	Possible Sources	Actions
The rear video is inoperative	Fuse Wiring, terminals or connectors Video camera APIM BCM	REFER to Diagnostic Routine I: The Rear Video Is Inoperative .
The FDIM displays PLEASE CHECK SURROUNDINGS FOR SAFETY and a black screen/no image or displays an error message	Fuse Wiring, terminals or connectors Video camera APIM BCM	NOTE: It may take up to 30 seconds before the message is displayed on the FDIM. REFER to Diagnostic Routine I: The Rear Video Is Inoperative .
Static/flashing/blinking/flickering/scrolling or rolling image/screen/scrolling horizontal lines	Wiring, terminals or connectors Video camera	REFER to Diagnostic Routine J: Poor Image Quality .
Poor image quality (foggy/cloudy/fuzzy/blurry/hazy image or moisture/water in lens or black spots)	Wiring, terminals or connectors Video camera	REFER to Diagnostic Routine J: Poor Image Quality .
Manual zoom function is inoperative	Manual zoom feature is disabled Video camera	CARRY OUT the video camera configuration using the scan tool under Body > RVC Configuration. REFER to Diagnostic Routine I: The Rear Video Is Inoperative .
The visual park aid alert is inoperative	Wiring, terminals or connectors Video camera BCM PAM	CARRY OUT the video camera configuration using the scan tool under Body > RVC Configuration. REFER to Diagnostic Routine L: The Visual Park Aid Alert Is Inoperative .
Fixed guidelines are not displayed on the video image	Fixed guidelines feature is disabled Video camera	CARRY OUT the video camera configuration using the scan tool under Body > RVC Configuration. REFER to Diagnostic Routine M: The Video Guidelines Are Inoperative .
Active guidelines are not displayed on the video image	Video camera not configured after replacement	CARRY OUT the video camera configuration using the scan tool under Body > RVC Configuration.
Active guidelines are not displayed on the video image	Active guidelines feature is disabled Steering wheel position data error Video camera	REFER to Diagnostic Routine M: The Video Guidelines Are Inoperative .
Video camera delay feature is inoperative	Video camera delay feature is disabled	ENABLE the video camera delay feature within the FDIM.
All other image concerns	Video camera	REFER to Diagnostic Routine I: The Rear Video Is Inoperative .