Pinpoint Test

RETRIEVE THE RECORDED DTCs FROM THE IPC SELF-TEST
1. Using a scan tool, perform the IPC self-test.
Are any DTCs recorded?
1. Yes: For DTC U0121:00, REFER to Diagnostic Routine AU: U0121:00 .
  For all other DTCs , REFER to DTC Chart: Instrument Panel Cluster (IPC) .
2. No: GO to 2 .
RETRIEVE THE RECORDED DTCs FROM THE ABS MODULE SELF-TEST
1. Using a scan tool, perform the ABS module self-test.
Are any DTCs recorded?
1. Yes: REFER to DTC CHART: ANTI-LOCK BRAKE SYSTEM (ABS) MODULE .
2. No: GO to 3 .
CARRY OUT THE IPC INDICATOR LAMP CONTROL ACTIVE COMMAND USING THE SCAN TOOL
1. Ignition ON.
2. Using a scan tool, view the IPC PIDs .
3. Select the IPC stability-traction control indicator (sliding car icon) PID (TC/IVD/RSCLMP). Command the stability-traction control indicator (sliding car icon) on and off while observing the stability-traction control indicator (sliding car icon).
Does the stability-traction control indicator (sliding car icon) illuminate when commanded on and turn off when commanded off?
1. Yes: If the stability-traction control indicator (sliding car icon) is never on, the system is operating correctly at this time.
  If the stability-traction control indicator (sliding car icon) is always on, INSTALL a new ABS module. REFER to ANTI-LOCK BRAKE SYSTEM (ABS) MODULE .
2. No: INSTALL a new IPC. REFER to Instrument Panel Cluster (IPC) .