LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Explorer Base, 2.0 9 >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Information Center - Instrumentation, Message Center, And Warning Chimes >> Diagnostic Routine(S) >> Diagnostic Routine AJ >> Pinpoint Test

Pinpoint Test

  1. CHECK THE MESSAGE CENTER OPERATION
    1. Close all doors, hood and liftgate.
    2. Ignition ON.
    3. Open the driver door while monitoring the message center displays.

    Does the message center display DRIVER DOOR AJAR? 

    1. Yes: GO to 2  .
    2. No: INSTALL a new IPC. REFER to Instrument Panel Cluster (IPC) .
  2. RETRIEVE THE RECORDED DTCs  FROM THE IPC SELF-TEST
    1. Using a scan tool, perform the IPC self-test.

    Is DTC U0121:00 recorded? 

    1. Yes: REFER to Diagnostic Routine AU: U0121:00 .
    2. No: GO to 3  .
  3. RETRIEVE THE RECORDED DTCs  FROM THE ABS MODULE SELF-TEST
    1. Using a scan tool, perform the ABS module self-test.

    Are any DTCs recorded? 

    1. Yes: REFER to DTC CHART: ANTI-LOCK BRAKE SYSTEM (ABS) MODULE .
    2. No: INSTALL a new ABS module. REFER to ANTI-LOCK BRAKE SYSTEM (ABS) MODULE .
scientia non olet · About LEMON Manuals