LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Escape Hybrid, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 822 (Interior Trim And Ornamentation -- F250-F550 Super Duty) >> Removal And Installation >> Cab Rear Trim Panel - Regular Cab >> Removal And Installation

Removal And Installation

WARNING: This page is about a different car, the 2007 Ford Pickup, 2007 Ford F550 Super Duty, 2007 Ford F450 Super Duty, and 2007 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove child safety seat tether anchor. For additional information, refer to SAFETY BELT SYSTEM article.
  2. If equipped, remove the utility trays and jack assembly.
    3. Fig 1: Locating Utility Trays And Jack Assembly
    GF0004844Courtesy of FORD MOTOR CO.
  3. Remove the RH and LH B-pillar trim panels. For additional information, refer to B-Pillar Trim Panel - Regular Cab  in this article.
  4. Remove the 4 pushpins.
    5. Fig 2: Locating Pushpins
    GF0004847Courtesy of FORD MOTOR CO.
  5. Remove the trim cover.
  6. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals