LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Escape 2WD V6-3.0L >> Repair and Diagnosis >> Engine, Cooling and Exhaust >> Engine >> Camshaft, Lifters and Push Rods >> Lifter / Lash Adjuster >> Service and Repair >> Removal and Replacement >> Hydraulic Lash Adjuster

Hydraulic Lash Adjuster




Hydraulic Lash Adjuster





Removal and Installation

1. Remove the camshaft roller followers. For additional information, refer to Camshaft Roller Follower Camshaft Roller Follower.

2. NOTE: Mark the positions of the hydraulic lash adjusters to make sure they are assembled in their original positions.
Remove the hydraulic lash adjusters.


3. NOTE: Inspect the hydraulic lash adjusters for scoring marks and uneven wear in the bore. Install new lash adjusters if necessary.
To install, reverse the removal procedure.

- Lubricate the hydraulic lash adjusters with clean engine oil.

scientia non olet · About LEMON Manuals