Axle Nut: Specifications
To adjust the bearings, using the Wheel Hub Nut Socket, tighten the nut to 95 Nm (70 lb-ft).
Back off the nut 90 degrees.
Using the Wheel Hub Nut Socket, tighten the nut.
Tighten to 24 Nm (18 lb-ft).
To adjust the bearings, using the Wheel Hub Nut Socket, tighten the nut to 95 Nm (70 lb-ft).
Back off the nut 90 degrees.
Using the Wheel Hub Nut Socket, tighten the nut.
Tighten to 24 Nm (18 lb-ft).