Cargo Lamp: Service and Repair

Cargo Lamp

Vehicles With Headliner










Vehicles Without Headliner









Removal and Installation

Vehicles with headliner

1. NOTE: The tabs (located just above the headliner) can be accessed with a small angled pick tool. They are released by pulling them away from the lamp assembly. Be careful not to use too much pressure or the tabs may break.

Release the 3 locking tabs and remove the interior lamp lens.






2. Release the 2 retaining clips (through the access holes) and remove the interior lamp.
- Disconnect the electrical connector.






Vehicles without headliner

3. Remove the 2 lens-to-cargo lamp screws.





4. Remove the cargo lamp.
- Remove the 2 screws.

- Disconnect the electrical connector.






Any cargo lamp

5. To install, reverse the removal procedure.