Inspection And Verification
SPECIAL TOOL(S)
| Vehicle Communication Module (VCM) and Integrated Diagnostic System (IDS) software with appropriate hardware, or equivalent scan tool |
- Verify the customer concern by operating the adjustable pedals.
- Visually inspect for obvious signs of mechanical or electrical damage.VISUAL INSPECTION CHART
Mechanical Electrical - Adjustable pedal cable
- Adjustable pedal motor
- Adjustable pedals
- Foreign material
- Adjustable pedal switch
- Driver Seat Module (DSM)
- Memory position switch
- Remote Keyless Entry (RKE) transmitter
- Smart Junction Box (SJB) fuse 20 (15A)
- Wiring, terminals or connectors
- If an obvious cause for an observed or reported concern is found, correct the cause (if possible) before proceeding to the next step.
- If the cause is not visually evident, connect the scan tool to the Data Link Connector (DLC).
- If the scan tool does not communicate with the VCM:
- check the VCM connection to the vehicle.
- check the scan tool connection to the VCM.
- refer to MODULE COMMUNICATIONS NETWORK Article, No Power To The Scan Tool, to diagnose no power to the scan tool.
- If the scan tool does not communicate with the vehicle:
- verify the ignition key is in the ON position.
- verify the scan tool operation with a known good vehicle.
- refer to MODULE COMMUNICATIONS NETWORK Article to diagnose no response from the PCM.
- Carry out the network test.
- If the scan tool responds with no communication for one or more modules, refer to MODULE COMMUNICATIONS NETWORK Article.
- If the network test passes, retrieve and record continuous memory DTCs.
- Clear the continuous DTCs and carry out the self-test diagnostics for the Driver Seat Module (DSM).
- If the DTCs retrieved are related to the concern, go to DRIVER SEAT MODULE (DSM) DTC CHART . For all other DTCs, refer to MULTIFUNCTION ELECTRONIC MODULE Article.
- If no DTCs related to the concern are retrieved, GO to SYMPTOM CHART - ADJUSTABLE PEDALS WITHOUT MEMORY FEATURE or GO to SYMPTOM CHART - ADJUSTABLE PEDALS WITH MEMORY FEATURE .
NOTE:
Make sure to use the latest scan tool software release.
NOTE:
The Vehicle Communication Module (VCM) LED prove out confirms power and ground from the DLC are provided to the VCM.