Safety Belt Warning Chime
The safety belt warning chime warns that the safety belt is not fastened. The safety belt warning chime sounds when the driver safety belt is not fastened and the ignition is changed from the OFF or ACC to the RUN or START mode.
The safety belt warning chime stops sounding when the safety belt is fastened, when the ignition is switched from the ON or START mode to the OFF or ACC mode, or when the chime has sounded for approximately 6 seconds.
The safety belt warning chime inputs are:
- Ignition state.
- Driver safety belt warning chime request communicated by the RCM to the IPC through the HS-CAN.