IPC Prove-Out
The IPC carries out a display prove-out to verify that all module controlled warning/indicator lamps and monitored systems are functioning correctly within the IPC. When the ignition is in the ON mode with the engine off, the indicators illuminate to prove-out according the following table:
| Indicator | Indicator Type | Prove-Out Duration |
|---|---|---|
| Air bag | Warning | 6 seconds |
| ABS | Warning | 3 seconds |
| Anti-theft indicator | Informational | 3 seconds |
| Adaptive cruise speed control | Informational | No prove-out |
| Brake | Warning | 3 seconds |
| Cruise control | Informational | No prove-out |
| Grade assist | Informational | No prove-out |
| High beam | Informational | No prove-out |
| Malfunction Indicator Lamp (MIL) | Warning | Engine startup |
| RH/LH turn signals | Informational | No prove-out |
| Safety belt | Warning | 65 seconds if the safety belt is unbuckled, turns off when the safety belt is buckled |
| Traction control disabled | Informational | 3 seconds |
| Traction control | Informational | 3 seconds |
| Tire Pressure Monitoring System (TPMS) | Warning | 3 seconds |
| Traction control | Informational | 3 seconds |