LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2011 >> Taurus Limited, AWD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Seat System - Seats >> Removal And Installation >> Seat Cushion Heater Mat - Rear >> Removal

Seat Cushion Heater Mat - Rear: Removal

NOTE: The heater mat is not designed to be separated from the foam pad. Doing so will damage the foam pad. Install a new foam pad and heater mat. Failure to follow this instruction can result in seat component damage and system failure.
NOTE: For parts identification and location, refer to SEAT - EXPLODED VIEW, SECOND ROW  in this service information.
  1. Remove the rear seat cushion cover. For additional information, refer to SEAT CUSHION COVER - REAR  in this service information.
  2. Disconnect and remove the heated seat module and cushion wire harness.
  3. Remove the cushion foam pad from the frame. Discard the cushion foam pad with heater mat.
scientia non olet · About LEMON Manuals