Symptom Chart

NOTE: Refer to DESCRIPTION AND OPERATION article, INTELLIGENT ACCESS (IA) WITH PUSH BUTTON START article in Section 419-01B to review the procedures for achieving the various ignition states (ignition off, ignition in accessory, ignition on, ignition start) on vehicles with this feature.

SYMPTOM CHART

Condition	Possible Sources	Action
The turn signal lamps are inoperative	Fuse Wiring, terminals or connectors Multifunction switch Smart Junction Box (SJB)	VERIFY the bulbs are OK. If OK, GO to PINPOINT TEST N .
The turn signal lamps are always on	Wiring, terminals or connectors Multifunction switch SJB	GO to PINPOINT TEST O .
One turn signal/hazard lamp is inoperative/always on	Wiring, terminals or connectors Bulb holder Rear lamp jumper harness SJB	VERIFY the bulb is OK. If OK, GO to PINPOINT TEST P .
The hazard lamps are inoperative/always on	Wiring, terminals or connectors Hazard flasher lamp switch (part of the Passenger Air Bag Deactivation (PAD) indicator) SJB	GO to PINPOINT TEST Q .