LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2011 >> Ranger 2WD L4-2.3L >> Repair and Diagnosis >> Engine, Cooling and Exhaust >> Engine >> Drive Belts, Mounts, Brackets and Accessories >> Drive Belt Tensioner >> Service and Repair >> Accessory Drive Belt Tensioner

Accessory Drive Belt Tensioner




Accessory Drive Belt Tensioner - 2.3L

Removal and Installation

1. Rotate the accessory drive belt tensioner counterclockwise and remove the accessory drive belt.

2. Remove the bolt and the belt tensioner.
- To install, tighten to 50 Nm (37 lb-ft).

3. To install, reverse the removal procedure.

scientia non olet · About LEMON Manuals