Brake Shoes &/Or Pads: Remove & Replace

Includes: Clean, lube and/or replace Brake Hardware as necessary. Adjust Brakes (where applicable). Includes: Repack Wheel Bearings (where applicable). DOES NOT include refinishing.

Applies To	Note	Standard Hours	Warranty Hours	Skill Level
All,Both Axles		1.8		B
Front,Both Sides		1.0		B
Rear,Both Sides		1.0		B
Combination Procedure: AXLE SEAL: Replace: Semi-Floating Axle.
Rear,Both		0.8		B
Rear,One Side		0.6		B
Combination Procedure: BRAKE HOSE: Replace: Includes: Bleed Brake System.
Each Additional		0.2		B
One		0.4		B
Combination Procedure: CALIPER: Replace:
One	Includes: Bleed Brakes.	0.7		B
Combination Procedure: DISC ROTOR: Burnish Brake Rotors While Driving Vehicle:
		0.5		B
Combination Procedure: DISC ROTOR: Remove and Install for Refinishing: NOTE: This operation does not apply to drive axles. If on vehicle refinishing is not possible use appropriate repair operation.
RWD, Front,Each	Includes: Repack Wheel Bearings.	0.3		B
Combination Procedure: DISC ROTOR: Replace:
RWD, Front,Each	Includes: Repack Wheel Bearings.	0.4		B
Combination Procedure: PARKING BRAKE SHOE & LINING: Replace:
Both Sides		0.6		B
Combination Procedure: WHEEL BEARING: Repack:
RWD, Front,Both Sides		0.8		B
Combination Procedure: WHEEL BEARING: Replace:
RWD, Front,One Side		0.5		B
Combination Procedure: WHEEL HUB: Replace:
RWD, Front,Both Sides		0.8		B
RWD, Front,One Side		0.4		B