LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2011 >> Mustang V6-3.7L >> Repair and Diagnosis >> Brakes and Traction Control >> Disc Brake System >> Brake Rotor/Disc >> Service and Repair >> Removal and Replacement >> Front Disc Brake >> Brake Disc Shield

Brake Disc Shield




Brake Disc Shield

Removal and Installation

1. Remove the brake disc. For additional information, refer to Brake Disc Brake Disc.

2. Remove the 3 bolts and the brake disc shield.
- To install, tighten to 20 Nm (177 lb-in).

3. To install, reverse the removal procedure.

scientia non olet · About LEMON Manuals