LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2011 >> Mustang Base, 2D Convertible, Standard >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Cluster And Panel Illumination >> Removal And Installation >> Instrument Panel Dimmer Switch >> Removal and Installation

Removal and Installation

  1. Remove the steering column opening trim panel. For additional information, refer to Instrument Panel - Exploded View in INSTRUMENT PANEL AND CONSOLE article.
  2. Remove the switch bezel screw.
  3. Remove the switch bezel assembly.
  4. Disconnect the electrical connectors
  5. Release the tabs and remove the instrument panel dimmer switch from the switch bezel.
  6. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals