DTC U016C: Lost Communication With Fuel Pump Control Module B
U016C - LOST COMMUNICATION WITH FUEL PUMP CONTROL MODULE B
| Description: | The powertrain control module (PCM) monitors the fuel pump monitor 2 (FPM2) circuit for the presence of a duty cycled signal. If the FPM2 circuit is fixed at a low or high voltage, the PCM begins to increment a counter. The test fails when the PCM is still not detecting a duty cycled signal on the FPM2 circuit after a calibrated amount of time. | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | |||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to PINPOINT TEST KC . | ||