DTC P2109: Throttle/Pedal Position Sensor A Minimum Stop Performance

P2109 - THROTTLE/PEDAL POSITION SENSOR A MINIMUM STOP PERFORMANCE

Description:	The powertrain control module (PCM) monitors the electronic throttle for the ability of the throttle plate to reach the lower mechanical stop position within a calibrated amount of time at ignition ON. This DTC sets if the throttle plate does not reach the lower mechanical stop position within a calibrated amount of time.
Possible Causes:	Obstruction in the throttle plate movement Damaged electronic throttle body (ETB)
Diagnostic Aids:	Visually inspect the throttle plate for an obstruction.
Application	Key On Engine Off	Key On Engine Running	Continuous Memory
All	GO to PINPOINT TEST DV .