DTC P0722: Output Shaft Speed (OSS) Sensor Circuit No Signal
P0722 - OUTPUT SHAFT SPEED (OSS) SENSOR CIRCUIT NO SIGNAL
| Description: | The OSS sensor failed to provide a signal to the powertrain control module (PCM) upon initial movement of vehicle. | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | Check the wiring, connector, and sensor for damage. | ||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| Manual Transmission | GO to PINPOINT TEST DP . | ||
| Automatic Transmission | Refer to the appropriate Automatic Transmission, Diagnostic Trouble Code (DTC) Index to continue diagnosis. | ||