DTC P0507: Idle Air Control (IAC) System Rpm Higher Than Expected
P0507 - IDLE AIR CONTROL (IAC) SYSTEM RPM HIGHER THAN EXPECTED
| For Vehicles With An Idle Air Control (IAC) Valve | |||
| Description: | This DTC sets when the powertrain control module (PCM) detects an engine idle speed that is greater than the desired RPM. | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | Disconnect the IAC valve and look for little or no change in engine RPM as an indication of a stuck or damaged valve. | ||
| For All Others | |||
| Description: | This DTC sets when the powertrain control module (PCM) detects an engine idle speed that is greater than the desired RPM. | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | This DTC is informational only and it may be accompanied by other DTCs. Diagnose other DTCs first. If no other DTCs are present, inspect the intake air system for air restrictions, vacuum leaks, and damage. If no concerns are present, clear the DTC and repeat the self-test. | ||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| Ranger | GO to PINPOINT TEST KE . | ||
| All others | Refer to the Description, Possible Causes and Diagnostic Aids for the DTC in table. | ||