DTC P0506: Idle Air Control (IAC) System Rpm Lower Than Expected
P0506 - IDLE AIR CONTROL (IAC) SYSTEM RPM LOWER THAN EXPECTED
| For Vehicles With An Idle Air Control (IAC) Valve | |||
| Description: | This DTC sets when the powertrain control module (PCM) detects an engine idle speed that is less than the desired RPM. | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | Disconnect the IAC valve and look for little or no change in engine RPM as an indication of a stuck or damaged valve. | ||
| For All Others | |||
| Description: | This DTC sets when the powertrain control module (PCM) detects an engine idle speed that is less than the desired RPM. | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | This DTC may be accompanied by other DTCs. Diagnose other DTCs first. If no other DTCs are present, inspect the intake air system for air restrictions, vacuum leaks, and damage. If no concerns are present, clear the DTC and carry out the key ON engine running (KOER) self-test. | ||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| Ranger | GO to PINPOINT TEST KE . | ||
| All others | GO to PINPOINT TEST HU . | ||