DTC P0336: Crankshaft Position Sensor A Circuit Range/Performance
P0336 - CRANKSHAFT POSITION SENSOR A CIRCUIT RANGE/PERFORMANCE
| Description: | This DTC sets when the input signal to the powertrain control module (PCM) from the crankshaft position (CKP) sensor is erratic. | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | An inactive CKP signal causes a no start condition. Monitor the RPM PID while cranking the engine. A value of 0 RPM indicates a CKP concern. | ||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to PINPOINT TEST JD . | ||