DTC P0201 - P0209: Injector Circuit/Open - Cylinders 1 Through 9
P020X - INJECTOR CIRCUIT/OPEN - CYLINDER X
| For Vehicles With Direct Fuel Injection | |||
| Description: |
NOTE:
x represents injector numbers 1 through 9. The comprehensive component monitor (CCM) monitors the operation of the fuel injector drivers in the powertrain control module (PCM). The test fails when the fuel injector circuitry is inoperative. |
||
| Possible Causes: |
|
||
| Diagnostic Aids: | The PID Data Monitor INJx_F flags a concern. This DTC sets when a concern is detected between the PCM and either fuel injector circuit. |
||
| For All Others | |||
| Description: |
NOTE:
x represents injector numbers 1 through 9. The comprehensive component monitor (CCM) monitors the operation of the fuel injector drivers in the powertrain control module (PCM). The test fails when the fuel injector circuitry is inoperative. |
||
| Possible Causes: |
|
||
| Diagnostic Aids: | The PID Data Monitor INJx_F fault flags equals YES. This DTC sets when a concern is detected between the PCM and the fuel injector. |
||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| F-150 3.5L, Flex 3.5L GTDI, MKS 3.5L, MKT 3.5L, Taurus 3.5L GTDI |
GO to PINPOINT TEST DI . | ||
| All others | GO to PINPOINT TEST KG . | ||